Well Plate Probe – Stiffness 50 N/m – Tip Radius 25 μm

Probe used with 6-, 12-, 24-, 48-, 96-, 384-Well Plates and other deep dishes

$550

Well Plate Probe – Stiffness 50 N/m – Tip Radius 25 μm
The Optics11 Life probes are pre-calibrated (contact-based method) and reusable force sensors compatible with the Optics11 Life Nanoindenters. The probes are cantilever-based with an optical-fiber interferometric readout and are produced at our headquarters in Amsterdam.

Dependent on the application, the spring constant of the probe can be chosen between 0.025 N/m and 50 N/m which can measure elastic modulus between 10Pa and 1GPa. The unique feature of our probes is the large cantilever bending (up to 20μm) which allows measuring stiffness values spanning 3 orders of magnitude without changing the probe.

Furthermore, spherical (colloidal) glass tips mounted onto the cantilever can be chosen from 3 µm to 250 µm in radius to perform single indentations or indentation mapping at various depths/loads and resolutions.

Disclaimer
Please note that all probes are calibrated after manufacturing. Therefore, the calibrated stiffness and tip sizes may differ from the specified order values. Calibration specifications are: Stiffness = ± 5%, Tip radius = ± 1%.

Stiffness

50 N/m

Tip Size

25 μm

Compatible with

Pavone Nanoindenter